How do I adjust my Eccotemp water heater?

To make the adjustment: The hole that is furthest on the right looks up at the water regulator where you will see two Phillips head screws. Take the screw that is furthest on the right in about 1/4 or 1/2 turn. This will enable the portable tankless water heater to operate on a lower water pressure by restricting flow.

What is the minimum temperature for a tankless water heater?

You’ll want to shoot for 100-115 degrees Fahrenheit for your water to be heated. If your groundwater temperature is 60 degrees and you want your shower at 110 degrees, that’s going to be a 50-degree rise.

Can a tankless water heater cause low water pressure?

Low water pressure. A tankless water heater moves water from the hot water line through a heat exchanger, where heat from the gas jets is transferred into the water. If you notice low water pressure coming from your hot water faucets, these clogs might be the reason.

Is the eccotemp fvi12-lp a manual water heater?

The EccotempFVI12-LP Tankless Water Heater is a manual water heater. This means that any water temperature adjustments must be made at the face of the unit using the knobs for water flow and gas pressure. Mixing cold water at your output source is not recommended.

How does an eccotemp tankless water heater work?

The incredibly efficient Eccotemp FVI12-NG Tankless Water Heater uses an intense gas-fired flame to instantly heat water the moment it passes through the heater exchanger. So, as long as you feed water in, hot water will come out!

Can a tankless water heater be used in a cabin?

With the included Horizontal Vent Kit, this Eccotemp FVI12-LP Tankless Water Heater ready to install for indoor use right out of the box. Great for cabins and smaller homes, so you don’t bust your budget for a hot shower!

Is there a 3 ” vent Kit for my 20hi tankless water heater?

Help! My 3” Vent Kit Doesn’t Fit My 20HI Tankless Water Heater Why do I need to Flush and Descale my Eccotemp? EZ-Flush Descaler Kit and Why You Need One!

Is the eccotemp fvi12-ng a tankless water heater?

The Eccotemp FVI12-NG Tankless Water Heater is a manual water heater. This means that any water temperature adjustments must be made at the face of the unit using the knobs for water flow and gas pressure. Mixing cold water at your output source is not recommended.

How tall does an eccotemp tankless water heater need to be?

Uses standard 1/2″ NPT water fittings and is equipped with easy to use manual water temperature controls. The Eccotemp FVI12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp FVI12 above 2000 feet may effect overall product efficiency and performance.

Where did the eccotemp LP water heater go?

I purchased some of the Eccotemp LP models and one has gone to Taos, New Mexico to an Earthship project there and I kept one here for emergency hot water. (we had two hurricanes and hot water is a very nice thing to have. cold showers are not fun, but doable) Ok I am rambling. I installed the Eccotemp FVI12-NG tankless on Monday of this week.