How do I access my Zhone router

Type 192.168. 1.1 (the most common IP for Zhone routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your Zhone router is admin. The default password is admin.

How do I log directly into my router?

The router’s username and password. …
Your router’s IP address. …
The login URL. …
An ethernet cable, if your WiFi isn’t working and you don’t have internet access using your mobile device.

How do I access my router locally?

Launch a web browser.
In the Address bar, enter your router’s IP Address or “myrouter. local” then press [Enter].
NOTE: The default IP Address of the router is 192.168. 1.1. …
When the Linksys Smart Wi-Fi Account login appears, click the local access link below the Sign In section.

How do I reset my Zhone router password?

Locate the “Reset Default” button on the back panel of the router. Video of the Day.
Press and hold the “Reset Default” with a pen or toothpick. …
Release the “Reset Default” and wait for the router to reboot.
Access the router by entering “192.168.

How do I log into my 192.168 1.1 IP address?

Turn on your router and connect it to your computer with an Ethernet cable. …
Open your favorite web browser and type “ into the address bar. …
Enter the correct router login/password combination.

What is Zhone router?

Our fibre router (Zhone) converts the optical signal on the glass fibre into an electrical signal that runs over standard Ethernet copper cabling so you can plug it into a computer, or WiFi access point.

How do I access my router without a password?

Launch the “Settings” app from the Home screen.
Navigate to the “Network and internet settings” section.
Tap on “Wi-Fi.”
Select “Additional settings.”
Tap the “Connect by WPS button” option.
Next, a dialog should open telling you to push the “WPS button” on the router.

How do you change your wireless Internet password?

Open a web browser. …
Then type your router’s IP address into the search bar and press the Enter key. …
Next, enter your router’s username and password and click Sign In. …
Then click Wireless. …
Next, change your new WiFi name and/or password. …
Finally, click Apply or Save.

What is a Zhone modem?

Model:6718-A1. SKU:4648674. No content. 6718-A1 is a high-end triple-play-ready residential gateway with advanced router and bridge functions that supports multiple WAN interfaces with support of VDSL2, ADSL2+ and a Gigabit Ethernet WAN link.

How do I see my router settings?

Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the Cog icon. Step 2: With the Settings panel open, tap Network & Internet. On Samsung phones, tap Connections instead. Step 3: Tap Wi-Fi.

Article first time published on

How do I find the IP address of my router?

Go to Settings.
Tap Wi-Fi Settings.
Tap and hold on your connected network and select Manage Network Settings.
Check the box next to Show Advanced Options.
Select Static under IP Settings.
Your router IP address is listed under the Gateway section.

How do I find the username and password to my router?

To locate the default username and password for the router, look in its manual. If you’ve lost the manual, you can often find it by searching for your router’s model number and “manual” on Google. Or just search for your router’s model and “default password.”

Why is 192.168 1.1 not opening?

If you cannot reach the login page, it may be due to: A hardwired connection configuration issue (such as a bad Ethernet cable) Entering the IP address incorrectly. An IP address issue on the computer.

How do I access my PLDT router?

Type 192.168. 1.1 (the most common IP for PLDT routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your PLDT router is adminpldt. The default password is 1234567890.

How do I recover my router password without resetting it?

Use the Router Password Kracker. …
Use RouterPassView. …
Look for the sticker at the back of your router. …
Use the router’s default name and password. …
How to forward ports without knowing the password.

Is your router password the same as your Wi-Fi password?

A router password isn’t the same as a Wi-Fi password. The former is the password needed to access the router settings, while a password used for Wi-Fi is what guests need to access the internet from your house.

How do I log into AirTies?

Connect a PC, tablet, or mobile phone to your wireless network using the default SSID and password.
Open a web browser.
Log in (the default password is blank) and navigate to “Quick Setup” in the menu on the left-hand side.

How do I set up an AirTies router?

Log in to your router’s web interface (usually 192.168. …
Click the “INTERNET” tab on the left of the home screen.
Select “DNS Setup” on the Left.
Deselect “Use ISP assigned DNS Servers” (if its selected).
Change DNS1 and DNS2 entries. (

How do I reset my GTT router?

Reboot your modem by unplugging it for 30 seconds. Reset your wireless router. Periodically unplugging your wireless router for 30 seconds will clear its cache. Limit the number of connected devices.

What is Modem vs router?

Your modem is a box that connects your home network to the wider Internet. A router is a box that lets all of your wired and wireless devices use that Internet connection at once and also allows them to talk to one another without having to do so over the Internet.

How do I find out what my network password is?

Open the Start Menu and type Command Prompt.
Run the following command: netsh wlan show profile.
You will see the list of all saved WiFi networks. …
Once done, you will see the WiFi password of that particular network or modem under the Security Settings.

How do I change a router?

Check Your Internet Connection. …
Place the Router. …
Connect to Power. …
Connect to Your Internet Source. …
Access the Router’s Web Interface. …
Connect Wired Devices. …
Connect Your PC or Device to Wi-Fi.

How do I login as admin on WiFi?

Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1. Enter the default username and password (admin/admin in most cases). Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .

How do I connect my new router to my existing network?

Extending the Network With Wi-Fi.
Plug.
Follow the wireless router’s.
Disconnect the router’s.
Move it to a position where it’s close enough to reach the existing LAN’s network switch or hub with the Ethernet cable.
Connect one end of the Ethernet cable.
Connect the other end of the Ethernet cable.

How do I log into my router from my phone?

Connect to your wireless network. …
Launch the web browser on your smartphone. …
Type the default router IP in the address bar. …
Enter the default router login details. …
Make the necessary changes.

Why can't I access my router?

Make sure you are connected to the router’s WiFi network. The default WiFi settings are located on the bottom or back panel of the router. Make sure that you are using the correct web address, user name, and default password.

Why can't I access my default gateway?

Your default gateway may be unavailable due to incorrect IP settings. In rare cases, this may even be due to ISP configuration settings. Router settings and outdated drivers could also cause this problem. Some users reported that McAffee security solutions may sometimes block your connection.

Why I cant connect to router?

There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

How do I know if my PLDT router is working?

The PON light indicator should be steady green if the patch cord is connected properly. If you are connected via WiFi, WLAN 2.4Ghz or 5Ghz light indicator should be steady green or blinking, if there is an ongoing data transmission.

How do I access my PLDT FIBR admin 2020?

Open a web browser, type in the address bar 192.168.1.1/fh.
Enter the FIBERHOMESUPERADMIN credentials (see table above) then log in.
Click on the debug switch upon login and look for Web-Admin Switch toggle to enable then hit the apply button.
Logout from the FIBERHOMESUPERADMIN account.