How can you tell if a shower cartridge has worn out?

It will come slowly; use a wrench and pull lightly while it comes out of the surround. Not all shower faucet cartridges are the same. Take the old cartridge to your local hardware store for a direct match. You will see the wear on the old cartridge compared to the new one. Wear and oxidation on an old cartridge causes water to leak around the area.

What’s the best way to remove a shower cartridge?

You may need to use a pliar to pull it out being careful not to damage the metal. Using a pair of needle nose pliars, remove the U shaped pin holding the cartridge in place. Once you have removed the faceplate and pin, you are ready to remove your shower cartridge.

How to remove and replace a Moen shower cartridge?

Tips for replacing a Moen shower cartridge on a Moen Chateau shower. Video covers removal of the old faulty cartridge and replacing it with a new Moen 1225B cartridge. Please support my YouTube channel iScaper1 by using my Amazon Storefront to purchase products on Amazon. Loading…

Where is the cartridge in a shower faucet?

The shower faucet cartridge is the piece of pipe that connects the handle that changes the water supply from tub to shower with the inner valve.

How do you remove a cartridge from a shower?

Look to see if there’s a water shutoff near the shower valve. If not, shut the water off at the main water supply line. There’s a small clip holding the cartridge in the shower valve. Carefully pry that up. Use a cartridge removal tool to carefully work the old cartridge back and forth until it can be safely removed from the wall.

Where can I buy a new shower cartridge?

Depending on which company manufactured the valve, there may be some variations to how the valve cartridge is replaced. This homeowner had a Moen valve and the replacement parts were manufactured by Moen. They can be found at most home centers and plumbing supply stores.

What causes a shower cartridge to get stuck?

Dirt, hard water deposits, or both can cause a cartridge to become stuck inside the valve. When this happens, the best and easiest way to get a stuck plastic or brass sleeve cartridge out of a shower valve is to use a cartridge puller.