How can I troubleshoot my Kohler Kitchen Sink?
Take out the cartridge and pull the sink spout off the faucet base. Then remove and replace the diverter in the back of the Kohler faucet base with a new diverter, before reassembling the faucet. These troubleshooting steps for Kohler faucets work on most models, however your particular one may require additional fixes and repairs.
Where is the handle on a Kohler faucet?
If you have a single lever faucet, this will likely be on the back of the handle. In most cases, the handle is attached via a screw. Kohler explains you will then remove the handle via this screw with an Allen wrench, screwdriver or hex wrench, depending on the faucet model you have. Set the screw aside in a safe place.
What are the most common problems with Kohler faucets?
The most common troubleshooting and repair issues that arise in Kohler faucets revolve around the cartridge and the sprayer head. Each one is susceptible to leaks and both problems are fairly easy to repair.
How do you remove the bonnet from a Kohler faucet?
Then, you should be able to find the screw that holds the handle on the faucet and remove it. Once you have removed the screw, you will have access to the bonnet on your Kohler faucet. To remove it, use a glove with grips or a jar remover to turn the piece counterclockwise. This will enable you to screw it off the top of the faucet.
Why does my Kohler bathroom faucet keep leaking?
Continuous leak when faucet is off: When the faucet is off, water leaks from under the handle area. With this issue, dirt and debris have collected in the valve/cartridge which prevents the valve from properly controlling the flow of water.
How do you replace the handle on a Kohler single handle faucet?
Turn off the water to the faucet. Remove the plug button from the handle (Fig. 1). Loosen the screw underneath the plug button to remove the handle (Fig. 2). Unscrew the bonnet counterclockwise to expose the valve and the mounting nut; the bonnet should remove easily by hand (Fig. 3).
Is there a warranty on a Kohler faucet?
Replacement parts for this faucet may be covered under the Kohler Faucet Lifetime Limited Warranty. Contact Kohler Customer Service for additional details. Kohler replacement parts are designed with ease of installation in mind. The following resources may assist with installation and repair of the valve/cartridge.
Where is the spacer in a Kohler kitchen faucet?
The spacer/check valve assembly is located under the valve in the faucet body. In some faucets, a symptom of a worn out spacer/check valve is water leaking from the weep hole, a small hole located in the back of the faucet body. Continuous leak while faucet is on: Replace the seals/o-rings to return the faucet to water-tight operation.
