How are irrigation valves connected to the faucet?
We replaced an elbow joint with a T connection, so that the water could flow up to the faucet or down to the irrigation valves. The pipes are copper, so this involved a lot of cutting and soldering, and even getting into the crawl space below the house.
How did you install a drip irrigation system?
In our last home, we put in a sprinkler system, but we had some help. A local (Albuquerque) company took our landscape plan and created an irrigation plan, including sprinklers and a drip system. We then bought everything we needed from them all at once, including instructions on how to install it all.
What kind of fittings are used for drip irrigation?
The most common drip fittings used to start the installation of a drip irrigation system with 1/2” drip tubing are the 3/4” FHT and FPT compression adapters and 3/4” FHT tee fittings. Polyethylene drip tubing is available in coils of 50’, 100’, 200’, 500’ and 1000’.
Where to place a bib in an irrigation system?
If you want it near the beginning of the water line before a valve box, you can attach a garden hose and use it at any time. If you want the bib placed near the end of a zone, you will need to turn on the valve manually for that zone to use a garden hose on it.
What kind of valve does an irrigation timer use?
The timer’s 3/4″ professional grade inline valve includes flow control and two adapters to convert the inline valve with pipe thread into hose thread, allowing for outdoor faucet connections.
How do you pressurize a drip irrigation system?
Turn the water supply on again to pressurize the system. The unit will open momentarily and then will shut off. To the outlet of the valve, install a 3/4” screen filter with 155-mesh (model D55) to protect the drip system from clogging.
What kind of pressure regulator do I need for drip irrigation?
If water quality is a concern, install DIG’s fine mesh 3/4″ filter with 155-mesh (model D57A), then install the 25 PSI pressure regulator (model D46) and then a 3/4″ swivel adapter with screen (model C34). To automate the system, install one of DIG’s hose end timers before (upstream of) the backflow device.
What to consider when installing an irrigation system?
Most yards have a variety of elements that have to be considered when laying out an irrigation system: 1 Shrubs or other foundation plantings 2 Flower beds or mulched areas 3 Trees 4 Sidewalks 5 Fences and other installed features 6 Slopes 7 Areas of sun and shade
