Do water softeners have timers?
Residential water softeners have two kinds of control systems. The oldest and simplest is a clock timer, often called a day clock. It works like the timer on a stove. You pre select a day for regeneration, and when the day arrives, the timer initiates and carries out the regeneration of the softener.
What should you set your water softener at?
Your water softener hardness setting should be set to the amount of hardness in your water plus 4 for every part per million of dissolved iron in your water. On an older water softener, you may need to set your hardness slightly higher as the resin becomes less efficient.
When does the water softener alarm go off?
An alarm will beep every 30 seconds (from 8:00am to 8:30pm) to signal that the softener requires service. The alarm can be turned off by pressing any button but the blue indicator light and display will flash.
What happens if there is an error code on a water softener?
If there is an error code detected, the blue indicator light will flash 4 times every second and the display will flash ERR. An alarm will beep every 30 seconds (from 8:00am to 8:30pm) to signal that the softener requires service. The alarm can be turned off by pressing any button but the blue indicator light and display will flash.
What kind of microprocessor is in metered water softener?
48 000 grain capacity microprocessor based metered water softener. Our most popular model the WS1SM uses a standard flow GE/Autotrol 3/4″ 255 valve with a microprocessor based 460i control. The programmable microprocessor control utilizes high efficiency regeneration minimizing the consumption of salt.
What should I do if my water softener wont turn on?
If an electrical spike takes place from an incoming power line in your home, disconnect the power, unplug the power transformer from the wall outlet and wait for several minutes, then plug the transformer back in. The normal light should display and the motor may run for several minutes while the unit resets.
An alarm will beep every 30 seconds (from 8:00am to 8:30pm) to signal that the softener requires service. The alarm can be turned off by pressing any button but the blue indicator light and display will flash.
How to maintain a good water softener system?
How to Maintain a Water Softener 1 Regularly use iron out and pure salt through the system. 2 Use good quality salt. To maintain good results, always make sure you are using the best quality salt. 3 Do NOT use rock salt. 4 Continue to use iron-out at least once a year, this is because even pure salt contains some impurities.
If there is an error code detected, the blue indicator light will flash 4 times every second and the display will flash ERR. An alarm will beep every 30 seconds (from 8:00am to 8:30pm) to signal that the softener requires service. The alarm can be turned off by pressing any button but the blue indicator light and display will flash.
How does a salt water water softener work?
How Does a Water Softener Work? In the most simple terms, a water softener works by saturating hard water with sodium (salt), which removes all hard minerals. This is what allows it to remove minerals like calcium and magnesium that are responsible for hardness in the first place.
