Do I need to turn off the water to change a shower cartridge?
Most showers don’t have valves that shut off. The answer would be no, the water needs to be turned off to fix the valve.
Why is my water pressure so low after replacing my faucet?
If the valve or faucet you’ve replaced was made prior to the new water conservation laws, the drop you perceive in pressure may be a drop in water flow.
What causes a faucet to leak after replacing a cartridge?
The reason why a cartridge faucet leaks after replacing the cartridge can vary based on your water quality, the age of the faucet, and the type of cartridge. First, the leak may not have been caused by a faulty cartridge.
What’s the best way to replace a faucet?
The best rule of thumb is to replace all of the inside parts of a faucet at the same time so that you get a good seal. Contact our Denver plumbers today!
Why does my shower faucet run when turned off?
Because opening up a faucet’s guts may involve turning off the water to the house, especially if it’s a shower or tub faucet, it’s best not to do it until you verify that you’re actually using the faucet correctly. Worn rubber washers are often the cause of a constantly running faucet.
How to replace a hot water faucet in a bathroom?
1 Turn the water supply back on. 2 Turn on the faucet and open both the cold and hot water taps. 3 Inspect all the new connections and check for leaks above and below the sink.
The reason why a cartridge faucet leaks after replacing the cartridge can vary based on your water quality, the age of the faucet, and the type of cartridge. First, the leak may not have been caused by a faulty cartridge.
Why do I get Low water pressure out of my new faucet?
The only fix is to return the faucet for a non-water-saving model. When installing a new faucet, sometimes debris is lodged inside of the cartridge holes. This debris may be from soldering, filing or installing new piping. The cartridge holes allow water through the cartridge into the spout.
How can I fix a Moen faucet that is still leaking after?
I had a leaky Moen faucet (Moen 4600) so I removed the old cartridge and replaced it with a new brass replacement cartridge (model 1200.) Since replacing the cartridge I now have a leak from the valve stem, that leaks faster the more I open the valve.
