Can you replace a kitchen sink basket?
Completely remove the locknut, friction ring and gasket, and lift the old basket out of the sink. Scrape off the old putty with a plastic putty knife so you don’t scratch the sink. Seal the new basket in the sink with plumber’s putty as shown in Photo 4. If you can’t use plumber’s putty, use a non-water-based silicone.
Can a lock nut be removed from a sink?
There are a few different ways you can remove a stuck lock nut. The purpose of a lock nut is to hold the sink drain assembly secure in the sink above. If you’re replacing a sink drain and find yourself facing a stuck lock nut, there are a number of different techniques you can use to help remove it.
How do you get the basket out of the sink?
Press the basket into the sink. Use moderate pressure to squeeze the basket down into the sink drain, pressing a little putty out the sides. Thread on the gaskets and nut. Return to the underside of the sink.
What makes a locknut on a sink drain?
Sink drain locknuts are made of soft metal, usually some type of zinc metal composite that doesn’t corrode easily, but there are some that are also made of PVC. Regardless of the material from which they are made, they are thin and only made to make a solid seal between the drain basket and the underside of the sink.
How to install a new sink basket strainer?
Installing the New Basket Disassemble the new basket strainer. Decide on a method of sealing. Roll out a piece of putty into a snake. Apply plumber’s putty to the underside of the basket rim. Press the basket into the sink. Thread on the gaskets and nut. Scrape out excess putty, tighten further, and repeat. Reattach the tailpiece with new gaskets.
How do you remove a basket from a kitchen sink?
Completely remove the locknut, friction ring and gasket, and lift the old basket out of the sink. Scrape off the old putty with a plastic putty knife so you don’t scratch the sink.
When do I need to remove locknuts from my Sink?
Regardless of the material from which they are made, they are thin and only made to make a solid seal between the drain basket and the underside of the sink. Once in place — which may be for decades — the locknuts will only need to be removed if the basket needs to be changed or it leaks.
What to do if your kitchen sink basket strainer leaks?
Fill up the sink with water and touch a facial tissue between the bottom of the kitchen sink drain and the sink. If the tissue picks up any water, you’ve got a leaky basket strainer and it’s time to learn how to remove a sink drain.
What can I use to remove lock nut from sink drain?
Eventually you’ll be able to remove that stuck lock nut from the sink drain. Spray bathroom cleaner on the stuck nut and wipe up with a towel or rag. This will eliminate any mold or mildew growing on the surface and allow your tools a better grip. Spray the nut with penetrating lubricant.
