Can you remove a cast iron tub in one piece?
Or, maybe your bathroom’s doorframe is too small to fit a cast iron tub through it in one piece. When this happens, there’s, unfortunately, nothing else you can do. The only option at this point is to break the cast iron tub into pieces and haul those out of the bathroom. The best way to do that is with a sledgehammer.
Can you put a cast iron tub upstairs?
In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem.
How do you destroy a cast iron tub?
Break the tub apart with a sledgehammer if you don’t want to keep or sell it. Start by covering the cast iron with a heavy blanket or towel. Put on some goggles and a long-sleeve shirt and use a 16 lb (7.3 kg) sledgehammer to break the tub apart until it’s in smaller pieces.
Is a cast iron tub worth anything?
Depending on your cast iron bathtub’s weight and condition, it may be valuable either for resale or scrap. Cast iron bathtubs are generally worth up to $50 at scrap yards. Tubs in good condition can bring anywhere from about $300 to $2,500 on the resale market.
Can a cast iron tub be removed from the wall?
You should have everything disconnected from the tub at this point, now you have to break loose the tub from the walls if that’s how it’s installed. You’re going to have to do whatever it takes to remove it, this can entail removing wall tile, and other obstacles that can be holding the tub in place.
How big is an old cast iron tub?
Removing an Old and Heavy Cast Iron Tub by Proven Helper. Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove. Depending on what your plans are for the tub, you have several different methods you can use to remove one.
How do you remove an overflow plate from a cast iron tub?
Typically, the overflow plate is circular and connected to your tub with 1 to 2 screws that hold the stopper lever in place. Use a screwdriver to remove these screws along with the plate. Afterward, use your fingers to remove the lever hook from the linkage bar and then unscrew or pull the stopper to remove it.
How much support do you need for a cast iron bathtub?
So, a 5-by-10 foot bathroom floor generally supports up to 2,000 pounds. This provides sufficient support for most cast iron bathtubs, which run under 500 pounds, even when full.
You should have everything disconnected from the tub at this point, now you have to break loose the tub from the walls if that’s how it’s installed. You’re going to have to do whatever it takes to remove it, this can entail removing wall tile, and other obstacles that can be holding the tub in place.
Removing an Old and Heavy Cast Iron Tub by Proven Helper. Cast iron tubs can weigh over 300lbs easily depending on the size, shape, and wall thickness, which makes them very difficult to remove. Depending on what your plans are for the tub, you have several different methods you can use to remove one.
Typically, the overflow plate is circular and connected to your tub with 1 to 2 screws that hold the stopper lever in place. Use a screwdriver to remove these screws along with the plate. Afterward, use your fingers to remove the lever hook from the linkage bar and then unscrew or pull the stopper to remove it.
What’s the best way to remove a bathtub?
Cost can add up quickly, especially if you’re a novice and have never attempted to Remove Bathtub before. I would strongly recommend you hire a licensed and Insured Remodeling, or Plumbing Contractor to Remove Bathtub for you.
