Can I use PEX for toilet supply line?
Using the half inch PEX you’ll come out right behind the toilet on the left hand side. And then from there you’ll go ahead and get yourself a supply line running from the toilet tank to the size shut off valve that you have and simply hand screw it into place.
Can PEX run on water meter?
You can use PEX for the water line. Sometimes it’s good to go up a size since the OD is copper sizing, meaning that the ID is smaller than copper. The most common requirement is that you use about 4′ of 1″ copper at the meter, then connect the 1 1/2″ PVC running to the house.
Can a PEX be connected to a water heater?
If connecting to a water heater, the PEX cannot be within 18 inches of the water heater, so an 18-inch water heater flex line can be used as the transition into the water heater. With list in hand, call or head out to get the fittings and pipe length that you need.
Do you need clamps to install PEX tubing?
There are also push-fit fittings that can be used when installing PEX. They do not require any clamps or PEX tools, but they can get pricey very quickly. The fact that PEX tubing comes in really long rolls makes it quicker to install because there are fewer fittings to connect.
What’s the best way to install a PEX shower?
If this is a tub or shower, you can hook directly to the valve with PEX to iron pipe adapters into the valve. Clamp: Make sure to use the right clamps and tools together. If you have the cinch clamp tool, you will need to use only cinch clamps. Slide the clamp or crimp ring onto the pipe then slide the pipe onto the fitting all the way.
Can a PEX pipe be connected to a metal supply line?
Color-coding (red and blue) make it simple to distinguish hot and cold supply lines. PEX can be connected to existing metal supply lines with the correct fittings. PEX is not suitable for outdoor use.
Where to run PEX tubing to a toilet?
So what you want to do is either t off your main line coming in of your cold water or run a separate line from the main all the way over to your toilet. Using the half inch PEX you’ll come out right behind the toilet on the left hand side. And you want to come out of the floor.
There are also push-fit fittings that can be used when installing PEX. They do not require any clamps or PEX tools, but they can get pricey very quickly. The fact that PEX tubing comes in really long rolls makes it quicker to install because there are fewer fittings to connect.
If connecting to a water heater, the PEX cannot be within 18 inches of the water heater, so an 18-inch water heater flex line can be used as the transition into the water heater. With list in hand, call or head out to get the fittings and pipe length that you need.
If this is a tub or shower, you can hook directly to the valve with PEX to iron pipe adapters into the valve. Clamp: Make sure to use the right clamps and tools together. If you have the cinch clamp tool, you will need to use only cinch clamps. Slide the clamp or crimp ring onto the pipe then slide the pipe onto the fitting all the way.
