Can a valve washer be replaced on a faucet?
Other types of water shutoff valves such as gate valves and ball valves do not have a replaceable stop washer or valve washer like the one pointed to by the red arrow in our photo. First let’s double check that we’ve made the correct diagnosis of the cause of this drippy faucet.
Why is water still coming out of my faucet when I turn it off?
Check to make sure that the water is turned off by turning on the faucet valves. This also allows the faucet to drain any water that is still in the fixture and also releases any pressure built up in the line. It is not uncommon for shutoff valves to grow old and stop functioning correctly.
What should I do if my hot water faucet is stuck?
You will find two valves supplying water to the hot and cold handles of the faucet. Turn both these valves clockwise to cut off the water supply. If you can’t find these valves, you will need to turn off the main valve supplying water to the entire house.
Do you need to remove the bottom of a faucet?
Repeat with the mounting nut on the other tailpiece. If access space is tight, you may need to remove the water supply tubes from the ends of the faucet tailpieces to provide more space to reach up with the basin wrench.
Check to make sure that the water is turned off by turning on the faucet valves. This also allows the faucet to drain any water that is still in the fixture and also releases any pressure built up in the line. It is not uncommon for shutoff valves to grow old and stop functioning correctly.
What should I do if my outside water faucet is stuck?
Turn the shut-off handle completely clockwise. Turn on the faucet, if possible, to release any water pressure. Remove the screw holding the faucet handle in place and pull off the handle. Spray penetrating lubricant on all sides of the nut that sat behind the faucet’s handle and allow the lubricant to soak into the nut’s threads for a few minutes.
Can a faucet handle be turned off under the sink?
In some cases, when turning the valves off under the sink they may leak from the handle. In most cases, there is a packing nut that you can make a 1/4-turn tighter. If you tighten this nut too much you will not be able to turn the handle, so always tighten in small increments.
Other types of water shutoff valves such as gate valves and ball valves do not have a replaceable stop washer or valve washer like the one pointed to by the red arrow in our photo. First let’s double check that we’ve made the correct diagnosis of the cause of this drippy faucet.
