Can a new tub support a full bathtub?
New tub installed in a remodeled bathroom. A bathtub shouldn’t flex, crackle or pop when you fill it with water or step into it. It is helpful to understand what is flexing and why. A full bathtub is heavy, sometimes 500 to 600 lbs. with the addition of a person.
Can a contractor install a walk in bathtub?
Contractors that represent the walk-in bathtub’s retailer or manufacturer, on the other hand, are bounded by a contractual agreement to install the unit and to install it right. This is why the questions compiled below will help you in your search of finding the right model and the right method of installation.
Do you need to replace the base of a bathtub?
Keep in mind, that new tubs differ in width from old tubs, which means that before you can install a new tub, you need to remove the base moulding, floor covering, and underlayment. They, too, will need to be replaced. When you get right down to it, one thing leads to another when removing a bathtub.
Can a fiberglass tub support a cast iron tub?
In addition, fiberglass or acrylic tubs are not as rigid as cast iron tubs. Bottom line: If the underside of a bathtub isn’t supported well, the floor and tub material are likely to flex.
Do you need tub support for new bathroom?
You’ll need excellent tub support if you want to hold two. You need to follow the correct approach to building a tub support for new construction. This process becomes relevant as well if you end up retrofitting a not-to-code framing job, which can provide an unwelcome surprise if you rip up the subfloor as part of a bathroom renovation.
What kind of problems can bathtub be repaired for?
Bathtub problems can range from plumbing issues to broken tiles and damaged tub surfaces. Whether your tub is chipped and stained or the faucet is leaking, repairing it can give new life to your bathroom without the hassle and cost of replacing your entire bathtub.
Can a bathtub be installed without a joist?
Tubs are typically installed without doubling a joist. In more than 30 years I have not heard of a problem resulting from the lack of a doubled joist under a bath tub. What a bunch of nonsense. No one should be allowed to inspect a thing until they have worked in the specific trade for at least 5 yrs.
How does the support of a bathtub work?
— The rigid nature of the bath tub distributes the loads in ways that reduces the effect on individual members. — There are often partitions on the floor below that reduce the spans on the joists under the bathtub. When the spans are really long the member is controled by deflection consideations.
