Are drip pans required for water heaters in California?
Water Heater Stand or built in platform is required when water heater is installed in garage to elevate burner a minimum 18” above grade. Drain-Pan shall be required when a water heater and/or tank is installed in a location where it could cause damage; in case of failure/leak to floor, sub-floor, drywall.
Does California require water heaters to be double strapped?
The State of California requires that all water heaters must be strapped to resist motion during an earthquake. All water heaters must be strapped in at least two locations; the upper one-third of the unit and the lower one-third. The lower strap must be a minimum of 4″ above the water heater control unit.
Why are water heaters outside in California?
The location of your water heater matters. Many people put their water heaters in the basement, garage, or in an outdoor enclosure, as this helps reduce the risk of potentially lethal CO poisoning. It should be installed somewhere safe and away from hazardous or explosive materials.
Are electric water heaters legal in California?
The California Energy Code requires that all water heaters, including instantaneous tankless water heaters, meet minimum efficiency standards. Not all instantaneous tankless water heaters meet those minimum standards.
When do water heaters have to be braced in California?
California law (Health & Safety Code Sections 1921019217) requi- res: • Any new or replacement water heater sold in California on or after July 1, 1991 be braced, anchored or strapped when installed to resist falling or horizontal displacement due to earthquake forces.
Do You need A P / T line for a water heater in California?
The pan must be fitted with a minimum 3/4″ drain that drains to an approved location. The P/T line is not allowed to terminate at this pan or be connected to it. Combustion Air (CPC 506) Combustion air must be maintained per the California Plumbing Code.
What does the California Plumbing Code say about water heaters?
At a minimum, any water heater shall be secured in accordance with the California Plumbing Code, or modifications made thereto by a city, county, or city and county pursuant to Section 17958.5. 507.3 Support of Appliances
How big of a water heater do you need in California?
of California’s building and plumbing codes, which require that a minimum of two sets of bracing straps be provided to secure the water heater against movement. These guidelines were developed for water heaters with a capacity of 52 gallons or less, and
The pan must be fitted with a minimum 3/4″ drain that drains to an approved location. The P/T line is not allowed to terminate at this pan or be connected to it. Combustion Air (CPC 506) Combustion air must be maintained per the California Plumbing Code.
California law (Health & Safety Code Sections 1921019217) requi- res: • Any new or replacement water heater sold in California on or after July 1, 1991 be braced, anchored or strapped when installed to resist falling or horizontal displacement due to earthquake forces.
Do you need a code to install a water heater in California?
There are several codes you’ll likely run into regardless of your location. These codes address common safety concerns. California residents will also face additional codes that are statewide. Because of code complexity, it makes a lot of sense to pay a professional plumber for proper installation.
Do you need a flue line for a gas water heater?
To replace a failing gas water heater or install a new one, you need a gas supply line, a cold-water supply line and a flue connection to divert harmful combustion gases. This guide explains how to install a gas water heater tank in your home. Note: Tankless gas water heaters have different installation demands.
